Struct std::io::Cursor

1.0.0· source[]
pub struct Cursor<T> { /* private fields */ }
Expand description

A Cursor wraps an in-memory buffer and provides it with a Seek implementation.

Cursors are used with in-memory buffers, anything implementing AsRef<[u8]>, to allow them to implement Read and/or Write, allowing these buffers to be used anywhere you might use a reader or writer that does actual I/O.

The standard library implements some I/O traits on various types which are commonly used as a buffer, like Cursor<Vec<u8>> and Cursor<&[u8]>.

Examples

We may want to write bytes to a File in our production code, but use an in-memory buffer in our tests. We can do this with Cursor:

use std::io::prelude::*;
use std::io::{self, SeekFrom};
use std::fs::File;

// a library function we've written
fn write_ten_bytes_at_end<W: Write + Seek>(writer: &mut W) -> io::Result<()> {
    writer.seek(SeekFrom::End(-10))?;

    for i in 0..10 {
        writer.write(&[i])?;
    }

    // all went well
    Ok(())
}

// Here's some code that uses this library function.
//
// We might want to use a BufReader here for efficiency, but let's
// keep this example focused.
let mut file = File::create("foo.txt")?;

write_ten_bytes_at_end(&mut file)?;

// now let's write a test
#[test]
fn test_writes_bytes() {
    // setting up a real File is much slower than an in-memory buffer,
    // let's use a cursor instead
    use std::io::Cursor;
    let mut buff = Cursor::new(vec![0; 15]);

    write_ten_bytes_at_end(&mut buff).unwrap();

    assert_eq!(&buff.get_ref()[5..15], &[0, 1, 2, 3, 4, 5, 6, 7, 8, 9]);
}
Run

Implementations

Creates a new cursor wrapping the provided underlying in-memory buffer.

Cursor initial position is 0 even if underlying buffer (e.g., Vec) is not empty. So writing to cursor starts with overwriting Vec content, not with appending to it.

Examples
use std::io::Cursor;

let buff = Cursor::new(Vec::new());
Run

Consumes this cursor, returning the underlying value.

Examples
use std::io::Cursor;

let buff = Cursor::new(Vec::new());

let vec = buff.into_inner();
Run

Gets a reference to the underlying value in this cursor.

Examples
use std::io::Cursor;

let buff = Cursor::new(Vec::new());

let reference = buff.get_ref();
Run

Gets a mutable reference to the underlying value in this cursor.

Care should be taken to avoid modifying the internal I/O state of the underlying value as it may corrupt this cursor’s position.

Examples
use std::io::Cursor;

let mut buff = Cursor::new(Vec::new());

let reference = buff.get_mut();
Run

Returns the current position of this cursor.

Examples
use std::io::Cursor;
use std::io::prelude::*;
use std::io::SeekFrom;

let mut buff = Cursor::new(vec![1, 2, 3, 4, 5]);

assert_eq!(buff.position(), 0);

buff.seek(SeekFrom::Current(2)).unwrap();
assert_eq!(buff.position(), 2);

buff.seek(SeekFrom::Current(-1)).unwrap();
assert_eq!(buff.position(), 1);
Run

Sets the position of this cursor.

Examples
use std::io::Cursor;

let mut buff = Cursor::new(vec![1, 2, 3, 4, 5]);

assert_eq!(buff.position(), 0);

buff.set_position(2);
assert_eq!(buff.position(), 2);

buff.set_position(4);
assert_eq!(buff.position(), 4);
Run
🔬 This is a nightly-only experimental API. (cursor_remaining #86369)

Returns the remaining slice.

Examples
#![feature(cursor_remaining)]
use std::io::Cursor;

let mut buff = Cursor::new(vec![1, 2, 3, 4, 5]);

assert_eq!(buff.remaining_slice(), &[1, 2, 3, 4, 5]);

buff.set_position(2);
assert_eq!(buff.remaining_slice(), &[3, 4, 5]);

buff.set_position(4);
assert_eq!(buff.remaining_slice(), &[5]);

buff.set_position(6);
assert_eq!(buff.remaining_slice(), &[]);
Run
🔬 This is a nightly-only experimental API. (cursor_remaining #86369)

Returns true if the remaining slice is empty.

Examples
#![feature(cursor_remaining)]
use std::io::Cursor;

let mut buff = Cursor::new(vec![1, 2, 3, 4, 5]);

buff.set_position(2);
assert!(!buff.is_empty());

buff.set_position(5);
assert!(buff.is_empty());

buff.set_position(10);
assert!(buff.is_empty());
Run

Trait Implementations

Returns the contents of the internal buffer, filling it with more data from the inner reader if it is empty. Read more

Tells this buffer that amt bytes have been consumed from the buffer, so they should no longer be returned in calls to read. Read more

🔬 This is a nightly-only experimental API. (buf_read_has_data_left #86423)

Check if the underlying Read has any data left to be read. Read more

Read all bytes into buf until the delimiter byte or EOF is reached. Read more

Read all bytes until a newline (the 0xA byte) is reached, and append them to the provided buffer. Read more

Returns an iterator over the contents of this reader split on the byte byte. Read more

Returns an iterator over the lines of this reader. Read more

Returns a copy of the value. Read more

Performs copy-assignment from source. Read more

Formats the value using the given formatter. Read more

Returns the “default value” for a type. Read more

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

Pull some bytes from this source into the specified buffer, returning how many bytes were read. Read more

🔬 This is a nightly-only experimental API. (read_buf #78485)

Pull some bytes from this source into the specified buffer. Read more

Like read, except that it reads into a slice of buffers. Read more

🔬 This is a nightly-only experimental API. (can_vector #69941)

Determines if this Reader has an efficient read_vectored implementation. Read more

Read the exact number of bytes required to fill buf. Read more

Read all bytes until EOF in this source, placing them into buf. Read more

Read all bytes until EOF in this source, appending them to buf. Read more

🔬 This is a nightly-only experimental API. (read_buf #78485)

Read the exact number of bytes required to fill buf. Read more

Creates a “by reference” adaptor for this instance of Read. Read more

Transforms this Read instance to an Iterator over its bytes. Read more

Creates an adapter which will chain this stream with another. Read more

Creates an adapter which will read at most limit bytes from it. Read more

Seek to an offset, in bytes, in a stream. Read more

🔬 This is a nightly-only experimental API. (seek_stream_len #59359)

Returns the length of this stream (in bytes). Read more

Returns the current seek position from the start of the stream. Read more

Rewind to the beginning of a stream. Read more

Write a buffer into this writer, returning how many bytes were written. Read more

Like write, except that it writes from a slice of buffers. Read more

🔬 This is a nightly-only experimental API. (can_vector #69941)

Determines if this Writer has an efficient write_vectored implementation. Read more

Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more

Attempts to write an entire buffer into this writer. Read more

🔬 This is a nightly-only experimental API. (write_all_vectored #70436)

Attempts to write multiple buffers into this writer. Read more

Writes a formatted string into this writer, returning any error encountered. Read more

Creates a “by reference” adapter for this instance of Write. Read more

Write a buffer into this writer, returning how many bytes were written. Read more

Like write, except that it writes from a slice of buffers. Read more

🔬 This is a nightly-only experimental API. (can_vector #69941)

Determines if this Writer has an efficient write_vectored implementation. Read more

Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more

Attempts to write an entire buffer into this writer. Read more

🔬 This is a nightly-only experimental API. (write_all_vectored #70436)

Attempts to write multiple buffers into this writer. Read more

Writes a formatted string into this writer, returning any error encountered. Read more

Creates a “by reference” adapter for this instance of Write. Read more

Write a buffer into this writer, returning how many bytes were written. Read more

Like write, except that it writes from a slice of buffers. Read more

🔬 This is a nightly-only experimental API. (can_vector #69941)

Determines if this Writer has an efficient write_vectored implementation. Read more

Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more

Attempts to write an entire buffer into this writer. Read more

🔬 This is a nightly-only experimental API. (write_all_vectored #70436)

Attempts to write multiple buffers into this writer. Read more

Writes a formatted string into this writer, returning any error encountered. Read more

Creates a “by reference” adapter for this instance of Write. Read more

Write a buffer into this writer, returning how many bytes were written. Read more

Like write, except that it writes from a slice of buffers. Read more

🔬 This is a nightly-only experimental API. (can_vector #69941)

Determines if this Writer has an efficient write_vectored implementation. Read more

Flush this output stream, ensuring that all intermediately buffered contents reach their destination. Read more

Attempts to write an entire buffer into this writer. Read more

🔬 This is a nightly-only experimental API. (write_all_vectored #70436)

Attempts to write multiple buffers into this writer. Read more

Writes a formatted string into this writer, returning any error encountered. Read more

Creates a “by reference” adapter for this instance of Write. Read more

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Performs the conversion.

Performs the conversion.

The resulting type after obtaining ownership.

Creates owned data from borrowed data, usually by cloning. Read more

🔬 This is a nightly-only experimental API. (toowned_clone_into #41263)

Uses borrowed data to replace owned data, usually by cloning. Read more

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.