Primitive Type pointer

Raw, unsafe pointers, *const T, and *mut T.

See also the std::ptr module.

Working with raw pointers in Rust is uncommon, typically limited to a few patterns. Raw pointers can be unaligned or null. However, when a raw pointer is dereferenced (using the * operator), it must be non-null and aligned.

Storing through a raw pointer using *ptr = data calls drop on the old value, so write must be used if the type has drop glue and memory is not already initialized - otherwise drop would be called on the uninitialized memory.

Use the null and null_mut functions to create null pointers, and the is_null method of the *const T and *mut T types to check for null. The *const T and *mut T types also define the offset method, for pointer math.

Common ways to create raw pointers

1. Coerce a reference (&T) or mutable reference (&mut T).

let my_num: i32 = 10;
let my_num_ptr: *const i32 = &my_num;
let mut my_speed: i32 = 88;
let my_speed_ptr: *mut i32 = &mut my_speed;

To get a pointer to a boxed value, dereference the box:

let my_num: Box<i32> = Box::new(10);
let my_num_ptr: *const i32 = &*my_num;
let mut my_speed: Box<i32> = Box::new(88);
let my_speed_ptr: *mut i32 = &mut *my_speed;

This does not take ownership of the original allocation and requires no resource management later, but you must not use the pointer after its lifetime.

2. Consume a box (Box<T>).

The into_raw function consumes a box and returns the raw pointer. It doesn’t destroy T or deallocate any memory.

let my_speed: Box<i32> = Box::new(88);
let my_speed: *mut i32 = Box::into_raw(my_speed);

// By taking ownership of the original `Box<T>` though
// we are obligated to put it together later to be destroyed.
unsafe {
    drop(Box::from_raw(my_speed));
}

Note that here the call to drop is for clarity - it indicates that we are done with the given value and it should be destroyed.

3. Create it using ptr::addr_of!

Instead of coercing a reference to a raw pointer, you can use the macros ptr::addr_of! (for *const T) and ptr::addr_of_mut! (for *mut T). These macros allow you to create raw pointers to fields to which you cannot create a reference (without causing undefined behaviour), such as an unaligned field. This might be necessary if packed structs or uninitialized memory is involved.

#[derive(Debug, Default, Copy, Clone)]
#[repr(C, packed)]
struct S {
    aligned: u8,
    unaligned: u32,
}
let s = S::default();
let p = std::ptr::addr_of!(s.unaligned); // not allowed with coercion

4. Get it from C.

extern crate libc;

use std::mem;

unsafe {
    let my_num: *mut i32 = libc::malloc(mem::size_of::<i32>()) as *mut i32;
    if my_num.is_null() {
        panic!("failed to allocate memory");
    }
    libc::free(my_num as *mut libc::c_void);
}

Usually you wouldn’t literally use malloc and free from Rust, but C APIs hand out a lot of pointers generally, so are a common source of raw pointers in Rust.

Implementations

impl<T> *const Twhere
    T: ?Sized,

pub fn is_null(self) -> bool

Returns true if the pointer is null.

Note that unsized types have many possible null pointers, as only the raw data pointer is considered, not their length, vtable, etc. Therefore, two pointers that are null may still not compare equal to each other.

Behavior during const evaluation

When this function is used during const evaluation, it may return false for pointers that turn out to be null at runtime. Specifically, when a pointer to some memory is offset beyond its bounds in such a way that the resulting pointer is null, the function will still return false. There is no way for CTFE to know the absolute position of that memory, so we cannot tell if the pointer is null or not.

Examples

Basic usage:

let s: &str = "Follow the rabbit";
let ptr: *const u8 = s.as_ptr();
assert!(!ptr.is_null());

pub const fn cast<U>(self) -> *const U

Casts to a pointer of another type.

pub fn with_metadata_of<U>(self, val: *const U) -> *const Uwhere
    U: ?Sized,

🔬This is a nightly-only experimental API. (set_ptr_value #75091)

Use the pointer value in a new pointer of another type.

In case val is a (fat) pointer to an unsized type, this operation will ignore the pointer part, whereas for (thin) pointers to sized types, this has the same effect as a simple cast.

The resulting pointer will have provenance of self, i.e., for a fat pointer, this operation is semantically the same as creating a new fat pointer with the data pointer value of self but the metadata of val.

Examples

This function is primarily useful for allowing byte-wise pointer arithmetic on potentially fat pointers:

#![feature(set_ptr_value)]
let arr: [i32; 3] = [1, 2, 3];
let mut ptr = arr.as_ptr() as *const dyn Debug;
let thin = ptr as *const u8;
unsafe {
    ptr = thin.add(8).with_metadata_of(ptr);
    println!("{:?}", &*ptr); // will print "3"
}

pub const fn cast_mut(self) -> *mut T

Changes constness without changing the type.

This is a bit safer than as because it wouldn’t silently change the type if the code is refactored.

pub fn to_bits(self) -> usize

🔬This is a nightly-only experimental API. (ptr_to_from_bits #91126)

Casts a pointer to its raw bits.

This is equivalent to as usize, but is more specific to enhance readability. The inverse method is from_bits.

In particular, *p as usize and p as usize will both compile for pointers to numeric types but do very different things, so using this helps emphasize that reading the bits was intentional.

Examples

#![feature(ptr_to_from_bits)]
let array = [13, 42];
let p0: *const i32 = &array[0];
assert_eq!(<*const _>::from_bits(p0.to_bits()), p0);
let p1: *const i32 = &array[1];
assert_eq!(p1.to_bits() - p0.to_bits(), 4);

pub fn from_bits(bits: usize) -> *const T

🔬This is a nightly-only experimental API. (ptr_to_from_bits #91126)

Creates a pointer from its raw bits.

This is equivalent to as *const T, but is more specific to enhance readability. The inverse method is to_bits.

Examples

#![feature(ptr_to_from_bits)]
use std::ptr::NonNull;
let dangling: *const u8 = NonNull::dangling().as_ptr();
assert_eq!(<*const u8>::from_bits(1), dangling);

pub fn addr(self) -> usize

🔬This is a nightly-only experimental API. (strict_provenance #95228)

Gets the “address” portion of the pointer.

This is similar to self as usize, which semantically discards provenance and address-space information. However, unlike self as usize, casting the returned address back to a pointer yields invalid, which is undefined behavior to dereference. To properly restore the lost information and obtain a dereferenceable pointer, use with_addr or map_addr.

If using those APIs is not possible because there is no way to preserve a pointer with the required provenance, use expose_addr and from_exposed_addr instead. However, note that this makes your code less portable and less amenable to tools that check for compliance with the Rust memory model.

On most platforms this will produce a value with the same bytes as the original pointer, because all the bytes are dedicated to describing the address. Platforms which need to store additional information in the pointer may perform a change of representation to produce a value containing only the address portion of the pointer. What that means is up to the platform to define.

This API and its claimed semantics are part of the Strict Provenance experiment, and as such might change in the future (including possibly weakening this so it becomes wholly equivalent to self as usize). See the module documentation for details.

pub fn expose_addr(self) -> usize

🔬This is a nightly-only experimental API. (strict_provenance #95228)

Gets the “address” portion of the pointer, and ‘exposes’ the “provenance” part for future use in from_exposed_addr.

This is equivalent to self as usize, which semantically discards provenance and address-space information. Furthermore, this (like the as cast) has the implicit side-effect of marking the provenance as ‘exposed’, so on platforms that support it you can later call from_exposed_addr to reconstitute the original pointer including its provenance. (Reconstructing address space information, if required, is your responsibility.)

Using this method means that code is not following Strict Provenance rules. Supporting from_exposed_addr complicates specification and reasoning and may not be supported by tools that help you to stay conformant with the Rust memory model, so it is recommended to use addr wherever possible.

On most platforms this will produce a value with the same bytes as the original pointer, because all the bytes are dedicated to describing the address. Platforms which need to store additional information in the pointer may not support this operation, since the ‘expose’ side-effect which is required for from_exposed_addr to work is typically not available.

This API and its claimed semantics are part of the Strict Provenance experiment, see the module documentation for details.

pub fn with_addr(self, addr: usize) -> *const T

🔬This is a nightly-only experimental API. (strict_provenance #95228)

Creates a new pointer with the given address.

This performs the same operation as an addr as ptr cast, but copies the address-space and provenance of self to the new pointer. This allows us to dynamically preserve and propagate this important information in a way that is otherwise impossible with a unary cast.

This is equivalent to using wrapping_offset to offset self to the given address, and therefore has all the same capabilities and restrictions.

This API and its claimed semantics are part of the Strict Provenance experiment, see the module documentation for details.

pub fn map_addr(self, f: impl FnOnce(usize) -> usize) -> *const T

🔬This is a nightly-only experimental API. (strict_provenance #95228)

Creates a new pointer by mapping self’s address to a new one.

This is a convenience for with_addr, see that method for details.

This API and its claimed semantics are part of the Strict Provenance experiment, see the module documentation for details.

pub fn to_raw_parts(self) -> (*const (), <T as Pointee>::Metadata)

🔬This is a nightly-only experimental API. (ptr_metadata #81513)

Decompose a (possibly wide) pointer into its address and metadata components.

The pointer can be later reconstructed with from_raw_parts.

pub unsafe fn as_ref<'a>(self) -> Option<&'a T>

Returns None if the pointer is null, or else returns a shared reference to the value wrapped in Some. If the value may be uninitialized, as_uninit_ref must be used instead.

Safety

When calling this method, you have to ensure that either the pointer is null or all of the following is true:

• The pointer must be properly aligned.

• It must be “dereferenceable” in the sense defined in the module documentation.

• The pointer must point to an initialized instance of T.

• You must enforce Rust’s aliasing rules, since the returned lifetime 'a is arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. In particular, while this reference exists, the memory the pointer points to must not get mutated (except inside UnsafeCell).

This applies even if the result of this method is unused! (The part about being initialized is not yet fully decided, but until it is, the only safe approach is to ensure that they are indeed initialized.)

Examples

Basic usage:

let ptr: *const u8 = &10u8 as *const u8;

unsafe {
    if let Some(val_back) = ptr.as_ref() {
        println!("We got back the value: {val_back}!");
    }
}

Null-unchecked version

If you are sure the pointer can never be null and are looking for some kind of as_ref_unchecked that returns the &T instead of Option<&T>, know that you can dereference the pointer directly.

let ptr: *const u8 = &10u8 as *const u8;

unsafe {
    let val_back = &*ptr;
    println!("We got back the value: {val_back}!");
}

pub unsafe fn as_uninit_ref<'a>(self) -> Option<&'a MaybeUninit<T>>

🔬This is a nightly-only experimental API. (ptr_as_uninit #75402)

Returns None if the pointer is null, or else returns a shared reference to the value wrapped in Some. In contrast to as_ref, this does not require that the value has to be initialized.

Safety

When calling this method, you have to ensure that either the pointer is null or all of the following is true:

• The pointer must be properly aligned.

• It must be “dereferenceable” in the sense defined in the module documentation.

• You must enforce Rust’s aliasing rules, since the returned lifetime 'a is arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. In particular, while this reference exists, the memory the pointer points to must not get mutated (except inside UnsafeCell).

This applies even if the result of this method is unused!

Examples

Basic usage:

#![feature(ptr_as_uninit)]

let ptr: *const u8 = &10u8 as *const u8;

unsafe {
    if let Some(val_back) = ptr.as_uninit_ref() {
        println!("We got back the value: {}!", val_back.assume_init());
    }
}

pub const unsafe fn offset(self, count: isize) -> *const T

Calculates the offset from a pointer.

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

If any of the following conditions are violated, the result is Undefined Behavior:

• Both the starting and resulting pointer must be either in bounds or one byte past the end of the same allocated object.

• The computed offset, in bytes, cannot overflow an isize.

• The offset being in bounds cannot rely on “wrapping around” the address space. That is, the infinite-precision sum, in bytes must fit in a usize.

The compiler and standard library generally tries to ensure allocations never reach a size where an offset is a concern. For instance, Vec and Box ensure they never allocate more than isize::MAX bytes, so vec.as_ptr().add(vec.len()) is always safe.

Most platforms fundamentally can’t even construct such an allocation. For instance, no known 64-bit platform can ever serve a request for 2⁶³ bytes due to page-table limitations or splitting the address space. However, some 32-bit and 16-bit platforms may successfully serve a request for more than isize::MAX bytes with things like Physical Address Extension. As such, memory acquired directly from allocators or memory mapped files may be too large to handle with this function.

Consider using wrapping_offset instead if these constraints are difficult to satisfy. The only advantage of this method is that it enables more aggressive compiler optimizations.

Examples

Basic usage:

let s: &str = "123";
let ptr: *const u8 = s.as_ptr();

unsafe {
    println!("{}", *ptr.offset(1) as char);
    println!("{}", *ptr.offset(2) as char);
}

pub unsafe fn byte_offset(self, count: isize) -> *const T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes.

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using offset on it. See that method for documentation and safety requirements.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub const fn wrapping_offset(self, count: isize) -> *const T

Calculates the offset from a pointer using wrapping arithmetic.

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

This operation itself is always safe, but using the resulting pointer is not.

The resulting pointer “remembers” the allocated object that self points to; it must not be used to read or write other allocated objects.

In other words, let z = x.wrapping_offset((y as isize) - (x as isize)) does not make z the same as y even if we assume T has size 1 and there is no overflow: z is still attached to the object x is attached to, and dereferencing it is Undefined Behavior unless x and y point into the same allocated object.

Compared to offset, this method basically delays the requirement of staying within the same allocated object: offset is immediate Undefined Behavior when crossing object boundaries; wrapping_offset produces a pointer but still leads to Undefined Behavior if a pointer is dereferenced when it is out-of-bounds of the object it is attached to. offset can be optimized better and is thus preferable in performance-sensitive code.

The delayed check only considers the value of the pointer that was dereferenced, not the intermediate values used during the computation of the final result. For example, x.wrapping_offset(o).wrapping_offset(o.wrapping_neg()) is always the same as x. In other words, leaving the allocated object and then re-entering it later is permitted.

Examples

Basic usage:

// Iterate using a raw pointer in increments of two elements
let data = [1u8, 2, 3, 4, 5];
let mut ptr: *const u8 = data.as_ptr();
let step = 2;
let end_rounded_up = ptr.wrapping_offset(6);

// This loop prints "1, 3, 5, "
while ptr != end_rounded_up {
    unsafe {
        print!("{}, ", *ptr);
    }
    ptr = ptr.wrapping_offset(step);
}

pub fn wrapping_byte_offset(self, count: isize) -> *const T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes using wrapping arithmetic.

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using wrapping_offset on it. See that method for documentation.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub fn mask(self, mask: usize) -> *const T

🔬This is a nightly-only experimental API. (ptr_mask #98290)

Masks out bits of the pointer according to a mask.

This is convenience for ptr.map_addr(|a| a & mask).

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub const unsafe fn offset_from(self, origin: *const T) -> isize

Calculates the distance between two pointers. The returned value is in units of T: the distance in bytes divided by mem::size_of::<T>().

This function is the inverse of offset.

Safety

If any of the following conditions are violated, the result is Undefined Behavior:

• Both the starting and other pointer must be either in bounds or one byte past the end of the same allocated object.

• Both pointers must be derived from a pointer to the same object. (See below for an example.)

• The distance between the pointers, in bytes, must be an exact multiple of the size of T.

• The distance between the pointers, in bytes, cannot overflow an isize.

• The distance being in bounds cannot rely on “wrapping around” the address space.

Rust types are never larger than isize::MAX and Rust allocations never wrap around the address space, so two pointers within some value of any Rust type T will always satisfy the last two conditions. The standard library also generally ensures that allocations never reach a size where an offset is a concern. For instance, Vec and Box ensure they never allocate more than isize::MAX bytes, so ptr_into_vec.offset_from(vec.as_ptr()) always satisfies the last two conditions.

Most platforms fundamentally can’t even construct such a large allocation. For instance, no known 64-bit platform can ever serve a request for 2⁶³ bytes due to page-table limitations or splitting the address space. However, some 32-bit and 16-bit platforms may successfully serve a request for more than isize::MAX bytes with things like Physical Address Extension. As such, memory acquired directly from allocators or memory mapped files may be too large to handle with this function. (Note that offset and add also have a similar limitation and hence cannot be used on such large allocations either.)

Panics

This function panics if T is a Zero-Sized Type (“ZST”).

Examples

Basic usage:

let a = [0; 5];
let ptr1: *const i32 = &a[1];
let ptr2: *const i32 = &a[3];
unsafe {
    assert_eq!(ptr2.offset_from(ptr1), 2);
    assert_eq!(ptr1.offset_from(ptr2), -2);
    assert_eq!(ptr1.offset(2), ptr2);
    assert_eq!(ptr2.offset(-2), ptr1);
}

Incorrect usage:

let ptr1 = Box::into_raw(Box::new(0u8)) as *const u8;
let ptr2 = Box::into_raw(Box::new(1u8)) as *const u8;
let diff = (ptr2 as isize).wrapping_sub(ptr1 as isize);
// Make ptr2_other an "alias" of ptr2, but derived from ptr1.
let ptr2_other = (ptr1 as *const u8).wrapping_offset(diff);
assert_eq!(ptr2 as usize, ptr2_other as usize);
// Since ptr2_other and ptr2 are derived from pointers to different objects,
// computing their offset is undefined behavior, even though
// they point to the same address!
unsafe {
    let zero = ptr2_other.offset_from(ptr2); // Undefined Behavior
}

pub unsafe fn byte_offset_from(self, origin: *const T) -> isize

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the distance between two pointers. The returned value is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using offset_from on it. See that method for documentation and safety requirements.

For non-Sized pointees this operation considers only the data pointers, ignoring the metadata.

pub unsafe fn sub_ptr(self, origin: *const T) -> usize

🔬This is a nightly-only experimental API. (ptr_sub_ptr #95892)

Calculates the distance between two pointers, where it’s known that self is equal to or greater than origin. The returned value is in units of T: the distance in bytes is divided by mem::size_of::<T>().

This computes the same value that offset_from would compute, but with the added precondition that that the offset is guaranteed to be non-negative. This method is equivalent to usize::from(self.offset_from(origin)).unwrap_unchecked(), but it provides slightly more information to the optimizer, which can sometimes allow it to optimize slightly better with some backends.

This method can be though of as recovering the count that was passed to add (or, with the parameters in the other order, to sub). The following are all equivalent, assuming that their safety preconditions are met:

ptr.sub_ptr(origin) == count
origin.add(count) == ptr
ptr.sub(count) == origin

Safety

• The distance between the pointers must be non-negative (self >= origin)

• All the safety conditions of offset_from apply to this method as well; see it for the full details.

Importantly, despite the return type of this method being able to represent a larger offset, it’s still not permitted to pass pointers which differ by more than isize::MAX bytes. As such, the result of this method will always be less than or equal to isize::MAX as usize.

Panics

This function panics if T is a Zero-Sized Type (“ZST”).

Examples

#![feature(ptr_sub_ptr)]

let a = [0; 5];
let ptr1: *const i32 = &a[1];
let ptr2: *const i32 = &a[3];
unsafe {
    assert_eq!(ptr2.sub_ptr(ptr1), 2);
    assert_eq!(ptr1.add(2), ptr2);
    assert_eq!(ptr2.sub(2), ptr1);
    assert_eq!(ptr2.sub_ptr(ptr2), 0);
}

// This would be incorrect, as the pointers are not correctly ordered:
// ptr1.sub_ptr(ptr2)

pub fn guaranteed_eq(self, other: *const T) -> bool

🔬This is a nightly-only experimental API. (const_raw_ptr_comparison #53020)

Returns whether two pointers are guaranteed to be equal.

At runtime this function behaves like self == other. However, in some contexts (e.g., compile-time evaluation), it is not always possible to determine equality of two pointers, so this function may spuriously return false for pointers that later actually turn out to be equal. But when it returns true, the pointers are guaranteed to be equal.

This function is the mirror of guaranteed_ne, but not its inverse. There are pointer comparisons for which both functions return false.

The return value may change depending on the compiler version and unsafe code must not rely on the result of this function for soundness. It is suggested to only use this function for performance optimizations where spurious false return values by this function do not affect the outcome, but just the performance. The consequences of using this method to make runtime and compile-time code behave differently have not been explored. This method should not be used to introduce such differences, and it should also not be stabilized before we have a better understanding of this issue.

pub fn guaranteed_ne(self, other: *const T) -> bool

🔬This is a nightly-only experimental API. (const_raw_ptr_comparison #53020)

Returns whether two pointers are guaranteed to be unequal.

At runtime this function behaves like self != other. However, in some contexts (e.g., compile-time evaluation), it is not always possible to determine the inequality of two pointers, so this function may spuriously return false for pointers that later actually turn out to be unequal. But when it returns true, the pointers are guaranteed to be unequal.

This function is the mirror of guaranteed_eq, but not its inverse. There are pointer comparisons for which both functions return false.

The return value may change depending on the compiler version and unsafe code must not rely on the result of this function for soundness. It is suggested to only use this function for performance optimizations where spurious false return values by this function do not affect the outcome, but just the performance. The consequences of using this method to make runtime and compile-time code behave differently have not been explored. This method should not be used to introduce such differences, and it should also not be stabilized before we have a better understanding of this issue.

pub const unsafe fn add(self, count: usize) -> *const T

Calculates the offset from a pointer (convenience for .offset(count as isize)).

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

If any of the following conditions are violated, the result is Undefined Behavior:

• Both the starting and resulting pointer must be either in bounds or one byte past the end of the same allocated object.

• The computed offset, in bytes, cannot overflow an isize.

• The offset being in bounds cannot rely on “wrapping around” the address space. That is, the infinite-precision sum must fit in a usize.

The compiler and standard library generally tries to ensure allocations never reach a size where an offset is a concern. For instance, Vec and Box ensure they never allocate more than isize::MAX bytes, so vec.as_ptr().add(vec.len()) is always safe.

Most platforms fundamentally can’t even construct such an allocation. For instance, no known 64-bit platform can ever serve a request for 2⁶³ bytes due to page-table limitations or splitting the address space. However, some 32-bit and 16-bit platforms may successfully serve a request for more than isize::MAX bytes with things like Physical Address Extension. As such, memory acquired directly from allocators or memory mapped files may be too large to handle with this function.

Consider using wrapping_add instead if these constraints are difficult to satisfy. The only advantage of this method is that it enables more aggressive compiler optimizations.

Examples

Basic usage:

let s: &str = "123";
let ptr: *const u8 = s.as_ptr();

unsafe {
    println!("{}", *ptr.add(1) as char);
    println!("{}", *ptr.add(2) as char);
}

pub unsafe fn byte_add(self, count: usize) -> *const T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes (convenience for .byte_offset(count as isize)).

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using add on it. See that method for documentation and safety requirements.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub const unsafe fn sub(self, count: usize) -> *const T

Calculates the offset from a pointer (convenience for .offset((count as isize).wrapping_neg())).

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

If any of the following conditions are violated, the result is Undefined Behavior:

• Both the starting and resulting pointer must be either in bounds or one byte past the end of the same allocated object.

• The computed offset cannot exceed isize::MAX bytes.

• The offset being in bounds cannot rely on “wrapping around” the address space. That is, the infinite-precision sum must fit in a usize.

The compiler and standard library generally tries to ensure allocations never reach a size where an offset is a concern. For instance, Vec and Box ensure they never allocate more than isize::MAX bytes, so vec.as_ptr().add(vec.len()).sub(vec.len()) is always safe.

Most platforms fundamentally can’t even construct such an allocation. For instance, no known 64-bit platform can ever serve a request for 2⁶³ bytes due to page-table limitations or splitting the address space. However, some 32-bit and 16-bit platforms may successfully serve a request for more than isize::MAX bytes with things like Physical Address Extension. As such, memory acquired directly from allocators or memory mapped files may be too large to handle with this function.

Consider using wrapping_sub instead if these constraints are difficult to satisfy. The only advantage of this method is that it enables more aggressive compiler optimizations.

Examples

Basic usage:

let s: &str = "123";

unsafe {
    let end: *const u8 = s.as_ptr().add(3);
    println!("{}", *end.sub(1) as char);
    println!("{}", *end.sub(2) as char);
}

pub unsafe fn byte_sub(self, count: usize) -> *const T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes (convenience for .byte_offset((count as isize).wrapping_neg())).

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using sub on it. See that method for documentation and safety requirements.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub const fn wrapping_add(self, count: usize) -> *const T

Calculates the offset from a pointer using wrapping arithmetic. (convenience for .wrapping_offset(count as isize))

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

This operation itself is always safe, but using the resulting pointer is not.

The resulting pointer “remembers” the allocated object that self points to; it must not be used to read or write other allocated objects.

In other words, let z = x.wrapping_add((y as usize) - (x as usize)) does not make z the same as y even if we assume T has size 1 and there is no overflow: z is still attached to the object x is attached to, and dereferencing it is Undefined Behavior unless x and y point into the same allocated object.

Compared to add, this method basically delays the requirement of staying within the same allocated object: add is immediate Undefined Behavior when crossing object boundaries; wrapping_add produces a pointer but still leads to Undefined Behavior if a pointer is dereferenced when it is out-of-bounds of the object it is attached to. add can be optimized better and is thus preferable in performance-sensitive code.

The delayed check only considers the value of the pointer that was dereferenced, not the intermediate values used during the computation of the final result. For example, x.wrapping_add(o).wrapping_sub(o) is always the same as x. In other words, leaving the allocated object and then re-entering it later is permitted.

Examples

Basic usage:

// Iterate using a raw pointer in increments of two elements
let data = [1u8, 2, 3, 4, 5];
let mut ptr: *const u8 = data.as_ptr();
let step = 2;
let end_rounded_up = ptr.wrapping_add(6);

// This loop prints "1, 3, 5, "
while ptr != end_rounded_up {
    unsafe {
        print!("{}, ", *ptr);
    }
    ptr = ptr.wrapping_add(step);
}

pub fn wrapping_byte_add(self, count: usize) -> *const T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes using wrapping arithmetic. (convenience for .wrapping_byte_offset(count as isize))

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using wrapping_add on it. See that method for documentation.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub const fn wrapping_sub(self, count: usize) -> *const T

Calculates the offset from a pointer using wrapping arithmetic. (convenience for .wrapping_offset((count as isize).wrapping_neg()))

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

This operation itself is always safe, but using the resulting pointer is not.

The resulting pointer “remembers” the allocated object that self points to; it must not be used to read or write other allocated objects.

In other words, let z = x.wrapping_sub((x as usize) - (y as usize)) does not make z the same as y even if we assume T has size 1 and there is no overflow: z is still attached to the object x is attached to, and dereferencing it is Undefined Behavior unless x and y point into the same allocated object.

Compared to sub, this method basically delays the requirement of staying within the same allocated object: sub is immediate Undefined Behavior when crossing object boundaries; wrapping_sub produces a pointer but still leads to Undefined Behavior if a pointer is dereferenced when it is out-of-bounds of the object it is attached to. sub can be optimized better and is thus preferable in performance-sensitive code.

The delayed check only considers the value of the pointer that was dereferenced, not the intermediate values used during the computation of the final result. For example, x.wrapping_add(o).wrapping_sub(o) is always the same as x. In other words, leaving the allocated object and then re-entering it later is permitted.

Examples

Basic usage:

// Iterate using a raw pointer in increments of two elements (backwards)
let data = [1u8, 2, 3, 4, 5];
let mut ptr: *const u8 = data.as_ptr();
let start_rounded_down = ptr.wrapping_sub(2);
ptr = ptr.wrapping_add(4);
let step = 2;
// This loop prints "5, 3, 1, "
while ptr != start_rounded_down {
    unsafe {
        print!("{}, ", *ptr);
    }
    ptr = ptr.wrapping_sub(step);
}

pub fn wrapping_byte_sub(self, count: usize) -> *const T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes using wrapping arithmetic. (convenience for .wrapping_offset((count as isize).wrapping_neg()))

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using wrapping_sub on it. See that method for documentation.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub unsafe fn read(self) -> T

Reads the value from self without moving it. This leaves the memory in self unchanged.

See ptr::read for safety concerns and examples.

pub unsafe fn read_volatile(self) -> T

Performs a volatile read of the value from self without moving it. This leaves the memory in self unchanged.

Volatile operations are intended to act on I/O memory, and are guaranteed to not be elided or reordered by the compiler across other volatile operations.

See ptr::read_volatile for safety concerns and examples.

pub unsafe fn read_unaligned(self) -> T

Reads the value from self without moving it. This leaves the memory in self unchanged.

Unlike read, the pointer may be unaligned.

See ptr::read_unaligned for safety concerns and examples.

pub const unsafe fn copy_to(self, dest: *mut T, count: usize)

Copies count * size_of<T> bytes from self to dest. The source and destination may overlap.

NOTE: this has the same argument order as ptr::copy.

See ptr::copy for safety concerns and examples.

pub const unsafe fn copy_to_nonoverlapping(self, dest: *mut T, count: usize)

Copies count * size_of<T> bytes from self to dest. The source and destination may not overlap.

NOTE: this has the same argument order as ptr::copy_nonoverlapping.

See ptr::copy_nonoverlapping for safety concerns and examples.

pub fn align_offset(self, align: usize) -> usize

Computes the offset that needs to be applied to the pointer in order to make it aligned to align.

If it is not possible to align the pointer, the implementation returns usize::MAX. It is permissible for the implementation to always return usize::MAX. Only your algorithm’s performance can depend on getting a usable offset here, not its correctness.

The offset is expressed in number of T elements, and not bytes. The value returned can be used with the wrapping_add method.

There are no guarantees whatsoever that offsetting the pointer will not overflow or go beyond the allocation that the pointer points into. It is up to the caller to ensure that the returned offset is correct in all terms other than alignment.

Panics

The function panics if align is not a power-of-two.

Examples

Accessing adjacent u8 as u16

use std::mem::align_of;

let x = [5_u8, 6, 7, 8, 9];
let ptr = x.as_ptr();
let offset = ptr.align_offset(align_of::<u16>());

if offset < x.len() - 1 {
    let u16_ptr = ptr.add(offset).cast::<u16>();
    assert!(*u16_ptr == u16::from_ne_bytes([5, 6]) || *u16_ptr == u16::from_ne_bytes([6, 7]));
} else {
    // while the pointer can be aligned via `offset`, it would point
    // outside the allocation
}

pub fn is_aligned(self) -> bool

🔬This is a nightly-only experimental API. (pointer_is_aligned #96284)

Returns whether the pointer is properly aligned for T.

pub fn is_aligned_to(self, align: usize) -> bool

🔬This is a nightly-only experimental API. (pointer_is_aligned #96284)

Returns whether the pointer is aligned to align.

For non-Sized pointees this operation considers only the data pointer, ignoring the metadata.

Panics

The function panics if align is not a power-of-two (this includes 0).

impl<T> *const [T]

pub fn len(self) -> usize

🔬This is a nightly-only experimental API. (slice_ptr_len #71146)

Returns the length of a raw slice.

The returned value is the number of elements, not the number of bytes.

This function is safe, even when the raw slice cannot be cast to a slice reference because the pointer is null or unaligned.

Examples

#![feature(slice_ptr_len)]

use std::ptr;

let slice: *const [i8] = ptr::slice_from_raw_parts(ptr::null(), 3);
assert_eq!(slice.len(), 3);

pub fn as_ptr(self) -> *const T

🔬This is a nightly-only experimental API. (slice_ptr_get #74265)

Returns a raw pointer to the slice’s buffer.

This is equivalent to casting self to *const T, but more type-safe.

Examples

#![feature(slice_ptr_get)]
use std::ptr;

let slice: *const [i8] = ptr::slice_from_raw_parts(ptr::null(), 3);
assert_eq!(slice.as_ptr(), ptr::null());

pub unsafe fn get_unchecked<I>(
    self,
    index: I
) -> *const <I as SliceIndex<[T]>>::Outputwhere
    I: SliceIndex<[T]>,

🔬This is a nightly-only experimental API. (slice_ptr_get #74265)

Returns a raw pointer to an element or subslice, without doing bounds checking.

Calling this method with an out-of-bounds index or when self is not dereferenceable is undefined behavior even if the resulting pointer is not used.

Examples

#![feature(slice_ptr_get)]

let x = &[1, 2, 4] as *const [i32];

unsafe {
    assert_eq!(x.get_unchecked(1), x.as_ptr().add(1));
}

pub unsafe fn as_uninit_slice<'a>(self) -> Option<&'a [MaybeUninit<T>]>

🔬This is a nightly-only experimental API. (ptr_as_uninit #75402)

Returns None if the pointer is null, or else returns a shared slice to the value wrapped in Some. In contrast to as_ref, this does not require that the value has to be initialized.

Safety

When calling this method, you have to ensure that either the pointer is null or all of the following is true:

• The pointer must be valid for reads for ptr.len() * mem::size_of::<T>() many bytes, and it must be properly aligned. This means in particular:

  • The entire memory range of this slice must be contained within a single allocated object! Slices can never span across multiple allocated objects.

  • The pointer must be aligned even for zero-length slices. One reason for this is that enum layout optimizations may rely on references (including slices of any length) being aligned and non-null to distinguish them from other data. You can obtain a pointer that is usable as data for zero-length slices using NonNull::dangling().

• The total size ptr.len() * mem::size_of::<T>() of the slice must be no larger than isize::MAX. See the safety documentation of pointer::offset.

• You must enforce Rust’s aliasing rules, since the returned lifetime 'a is arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. In particular, while this reference exists, the memory the pointer points to must not get mutated (except inside UnsafeCell).

This applies even if the result of this method is unused!

See also slice::from_raw_parts.

impl<T> *mut [T]

pub fn len(self) -> usize

🔬This is a nightly-only experimental API. (slice_ptr_len #71146)

Returns the length of a raw slice.

The returned value is the number of elements, not the number of bytes.

This function is safe, even when the raw slice cannot be cast to a slice reference because the pointer is null or unaligned.

Examples

#![feature(slice_ptr_len)]
use std::ptr;

let slice: *mut [i8] = ptr::slice_from_raw_parts_mut(ptr::null_mut(), 3);
assert_eq!(slice.len(), 3);

pub fn is_empty(self) -> bool

🔬This is a nightly-only experimental API. (slice_ptr_len #71146)

Returns true if the raw slice has a length of 0.

Examples

#![feature(slice_ptr_len)]

let mut a = [1, 2, 3];
let ptr = &mut a as *mut [_];
assert!(!ptr.is_empty());

pub unsafe fn split_at_mut(self, mid: usize) -> (*mut [T], *mut [T])

🔬This is a nightly-only experimental API. (raw_slice_split #95595)

Divides one mutable raw slice into two at an index.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Panics

Panics if mid > len.

Safety

mid must be in-bounds of the underlying allocated object. Which means self must be dereferenceable and span a single allocation that is at least mid * size_of::<T>() bytes long. Not upholding these requirements is undefined behavior even if the resulting pointers are not used.

Since len being in-bounds it is not a safety invariant of *mut [T] the safety requirements of this method are the same as for split_at_mut_unchecked. The explicit bounds check is only as useful as len is correct.

Examples

#![feature(raw_slice_split)]
#![feature(slice_ptr_get)]

let mut v = [1, 0, 3, 0, 5, 6];
let ptr = &mut v as *mut [_];
unsafe {
    let (left, right) = ptr.split_at_mut(2);
    assert_eq!(&*left, [1, 0]);
    assert_eq!(&*right, [3, 0, 5, 6]);
}

pub unsafe fn split_at_mut_unchecked(self, mid: usize) -> (*mut [T], *mut [T])

🔬This is a nightly-only experimental API. (raw_slice_split #95595)

Divides one mutable raw slice into two at an index, without doing bounds checking.

The first will contain all indices from [0, mid) (excluding the index mid itself) and the second will contain all indices from [mid, len) (excluding the index len itself).

Safety

mid must be in-bounds of the underlying [allocated object]. Which means self must be dereferenceable and span a single allocation that is at least mid * size_of::<T>() bytes long. Not upholding these requirements is undefined behavior even if the resulting pointers are not used.

Examples

#![feature(raw_slice_split)]

let mut v = [1, 0, 3, 0, 5, 6];
// scoped to restrict the lifetime of the borrows
unsafe {
    let ptr = &mut v as *mut [_];
    let (left, right) = ptr.split_at_mut_unchecked(2);
    assert_eq!(&*left, [1, 0]);
    assert_eq!(&*right, [3, 0, 5, 6]);
    (&mut *left)[1] = 2;
    (&mut *right)[1] = 4;
}
assert_eq!(v, [1, 2, 3, 4, 5, 6]);

pub fn as_mut_ptr(self) -> *mut T

🔬This is a nightly-only experimental API. (slice_ptr_get #74265)

Returns a raw pointer to the slice’s buffer.

This is equivalent to casting self to *mut T, but more type-safe.

Examples

#![feature(slice_ptr_get)]
use std::ptr;

let slice: *mut [i8] = ptr::slice_from_raw_parts_mut(ptr::null_mut(), 3);
assert_eq!(slice.as_mut_ptr(), ptr::null_mut());

pub unsafe fn get_unchecked_mut<I>(
    self,
    index: I
) -> *mut <I as SliceIndex<[T]>>::Outputwhere
    I: SliceIndex<[T]>,

🔬This is a nightly-only experimental API. (slice_ptr_get #74265)

Returns a raw pointer to an element or subslice, without doing bounds checking.

Calling this method with an out-of-bounds index or when self is not dereferenceable is undefined behavior even if the resulting pointer is not used.

Examples

#![feature(slice_ptr_get)]

let x = &mut [1, 2, 4] as *mut [i32];

unsafe {
    assert_eq!(x.get_unchecked_mut(1), x.as_mut_ptr().add(1));
}

pub unsafe fn as_uninit_slice<'a>(self) -> Option<&'a [MaybeUninit<T>]>

🔬This is a nightly-only experimental API. (ptr_as_uninit #75402)

Returns None if the pointer is null, or else returns a shared slice to the value wrapped in Some. In contrast to as_ref, this does not require that the value has to be initialized.

For the mutable counterpart see as_uninit_slice_mut.

Safety

When calling this method, you have to ensure that either the pointer is null or all of the following is true:

• The pointer must be valid for reads for ptr.len() * mem::size_of::<T>() many bytes, and it must be properly aligned. This means in particular:

  • The entire memory range of this slice must be contained within a single allocated object! Slices can never span across multiple allocated objects.

  • The pointer must be aligned even for zero-length slices. One reason for this is that enum layout optimizations may rely on references (including slices of any length) being aligned and non-null to distinguish them from other data. You can obtain a pointer that is usable as data for zero-length slices using NonNull::dangling().

• The total size ptr.len() * mem::size_of::<T>() of the slice must be no larger than isize::MAX. See the safety documentation of pointer::offset.

• You must enforce Rust’s aliasing rules, since the returned lifetime 'a is arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. In particular, while this reference exists, the memory the pointer points to must not get mutated (except inside UnsafeCell).

This applies even if the result of this method is unused!

See also slice::from_raw_parts.

pub unsafe fn as_uninit_slice_mut<'a>(self) -> Option<&'a mut [MaybeUninit<T>]>

🔬This is a nightly-only experimental API. (ptr_as_uninit #75402)

Returns None if the pointer is null, or else returns a unique slice to the value wrapped in Some. In contrast to as_mut, this does not require that the value has to be initialized.

For the shared counterpart see as_uninit_slice.

Safety

When calling this method, you have to ensure that either the pointer is null or all of the following is true:

• The pointer must be valid for reads and writes for ptr.len() * mem::size_of::<T>() many bytes, and it must be properly aligned. This means in particular:

  • The entire memory range of this slice must be contained within a single allocated object! Slices can never span across multiple allocated objects.

  • The pointer must be aligned even for zero-length slices. One reason for this is that enum layout optimizations may rely on references (including slices of any length) being aligned and non-null to distinguish them from other data. You can obtain a pointer that is usable as data for zero-length slices using NonNull::dangling().

• The total size ptr.len() * mem::size_of::<T>() of the slice must be no larger than isize::MAX. See the safety documentation of pointer::offset.

• You must enforce Rust’s aliasing rules, since the returned lifetime 'a is arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. In particular, while this reference exists, the memory the pointer points to must not get accessed (read or written) through any other pointer.

This applies even if the result of this method is unused!

See also slice::from_raw_parts_mut.

impl<T> *mut Twhere
    T: ?Sized,

pub fn is_null(self) -> bool

Returns true if the pointer is null.

Note that unsized types have many possible null pointers, as only the raw data pointer is considered, not their length, vtable, etc. Therefore, two pointers that are null may still not compare equal to each other.

Behavior during const evaluation

When this function is used during const evaluation, it may return false for pointers that turn out to be null at runtime. Specifically, when a pointer to some memory is offset beyond its bounds in such a way that the resulting pointer is null, the function will still return false. There is no way for CTFE to know the absolute position of that memory, so we cannot tell if the pointer is null or not.

Examples

Basic usage:

let mut s = [1, 2, 3];
let ptr: *mut u32 = s.as_mut_ptr();
assert!(!ptr.is_null());

pub const fn cast<U>(self) -> *mut U

Casts to a pointer of another type.

pub fn with_metadata_of<U>(self, val: *mut U) -> *mut Uwhere
    U: ?Sized,

🔬This is a nightly-only experimental API. (set_ptr_value #75091)

Use the pointer value in a new pointer of another type.

In case val is a (fat) pointer to an unsized type, this operation will ignore the pointer part, whereas for (thin) pointers to sized types, this has the same effect as a simple cast.

The resulting pointer will have provenance of self, i.e., for a fat pointer, this operation is semantically the same as creating a new fat pointer with the data pointer value of self but the metadata of val.

Examples

This function is primarily useful for allowing byte-wise pointer arithmetic on potentially fat pointers:

#![feature(set_ptr_value)]
let mut arr: [i32; 3] = [1, 2, 3];
let mut ptr = arr.as_mut_ptr() as *mut dyn Debug;
let thin = ptr as *mut u8;
unsafe {
    ptr = thin.add(8).with_metadata_of(ptr);
    println!("{:?}", &*ptr); // will print "3"
}

pub const fn cast_const(self) -> *const T

Changes constness without changing the type.

This is a bit safer than as because it wouldn’t silently change the type if the code is refactored.

While not strictly required (*mut T coerces to *const T), this is provided for symmetry with cast_mut on *const T and may have documentation value if used instead of implicit coercion.

pub fn to_bits(self) -> usize

🔬This is a nightly-only experimental API. (ptr_to_from_bits #91126)

Casts a pointer to its raw bits.

This is equivalent to as usize, but is more specific to enhance readability. The inverse method is from_bits.

In particular, *p as usize and p as usize will both compile for pointers to numeric types but do very different things, so using this helps emphasize that reading the bits was intentional.

Examples

#![feature(ptr_to_from_bits)]
let mut array = [13, 42];
let mut it = array.iter_mut();
let p0: *mut i32 = it.next().unwrap();
assert_eq!(<*mut _>::from_bits(p0.to_bits()), p0);
let p1: *mut i32 = it.next().unwrap();
assert_eq!(p1.to_bits() - p0.to_bits(), 4);

pub fn from_bits(bits: usize) -> *mut T

🔬This is a nightly-only experimental API. (ptr_to_from_bits #91126)

Creates a pointer from its raw bits.

This is equivalent to as *mut T, but is more specific to enhance readability. The inverse method is to_bits.

Examples

#![feature(ptr_to_from_bits)]
use std::ptr::NonNull;
let dangling: *mut u8 = NonNull::dangling().as_ptr();
assert_eq!(<*mut u8>::from_bits(1), dangling);

pub fn addr(self) -> usize

🔬This is a nightly-only experimental API. (strict_provenance #95228)

Gets the “address” portion of the pointer.

This is similar to self as usize, which semantically discards provenance and address-space information. However, unlike self as usize, casting the returned address back to a pointer yields invalid, which is undefined behavior to dereference. To properly restore the lost information and obtain a dereferenceable pointer, use with_addr or map_addr.

If using those APIs is not possible because there is no way to preserve a pointer with the required provenance, use expose_addr and from_exposed_addr_mut instead. However, note that this makes your code less portable and less amenable to tools that check for compliance with the Rust memory model.

On most platforms this will produce a value with the same bytes as the original pointer, because all the bytes are dedicated to describing the address. Platforms which need to store additional information in the pointer may perform a change of representation to produce a value containing only the address portion of the pointer. What that means is up to the platform to define.

This API and its claimed semantics are part of the Strict Provenance experiment, and as such might change in the future (including possibly weakening this so it becomes wholly equivalent to self as usize). See the module documentation for details.

pub fn expose_addr(self) -> usize

🔬This is a nightly-only experimental API. (strict_provenance #95228)

Gets the “address” portion of the pointer, and ‘exposes’ the “provenance” part for future use in from_exposed_addr.

This is equivalent to self as usize, which semantically discards provenance and address-space information. Furthermore, this (like the as cast) has the implicit side-effect of marking the provenance as ‘exposed’, so on platforms that support it you can later call from_exposed_addr_mut to reconstitute the original pointer including its provenance. (Reconstructing address space information, if required, is your responsibility.)

Using this method means that code is not following Strict Provenance rules. Supporting from_exposed_addr_mut complicates specification and reasoning and may not be supported by tools that help you to stay conformant with the Rust memory model, so it is recommended to use addr wherever possible.

On most platforms this will produce a value with the same bytes as the original pointer, because all the bytes are dedicated to describing the address. Platforms which need to store additional information in the pointer may not support this operation, since the ‘expose’ side-effect which is required for from_exposed_addr_mut to work is typically not available.

This API and its claimed semantics are part of the Strict Provenance experiment, see the module documentation for details.

pub fn with_addr(self, addr: usize) -> *mut T

🔬This is a nightly-only experimental API. (strict_provenance #95228)

Creates a new pointer with the given address.

This performs the same operation as an addr as ptr cast, but copies the address-space and provenance of self to the new pointer. This allows us to dynamically preserve and propagate this important information in a way that is otherwise impossible with a unary cast.

This is equivalent to using wrapping_offset to offset self to the given address, and therefore has all the same capabilities and restrictions.

This API and its claimed semantics are part of the Strict Provenance experiment, see the module documentation for details.

pub fn map_addr(self, f: impl FnOnce(usize) -> usize) -> *mut T

🔬This is a nightly-only experimental API. (strict_provenance #95228)

Creates a new pointer by mapping self’s address to a new one.

This is a convenience for with_addr, see that method for details.

This API and its claimed semantics are part of the Strict Provenance experiment, see the module documentation for details.

pub fn to_raw_parts(self) -> (*mut (), <T as Pointee>::Metadata)

🔬This is a nightly-only experimental API. (ptr_metadata #81513)

Decompose a (possibly wide) pointer into its address and metadata components.

The pointer can be later reconstructed with from_raw_parts_mut.

pub unsafe fn as_ref<'a>(self) -> Option<&'a T>

Returns None if the pointer is null, or else returns a shared reference to the value wrapped in Some. If the value may be uninitialized, as_uninit_ref must be used instead.

For the mutable counterpart see as_mut.

Safety

When calling this method, you have to ensure that either the pointer is null or all of the following is true:

• The pointer must be properly aligned.

• It must be “dereferenceable” in the sense defined in the module documentation.

• The pointer must point to an initialized instance of T.

• You must enforce Rust’s aliasing rules, since the returned lifetime 'a is arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. In particular, while this reference exists, the memory the pointer points to must not get mutated (except inside UnsafeCell).

This applies even if the result of this method is unused! (The part about being initialized is not yet fully decided, but until it is, the only safe approach is to ensure that they are indeed initialized.)

Examples

Basic usage:

let ptr: *mut u8 = &mut 10u8 as *mut u8;

unsafe {
    if let Some(val_back) = ptr.as_ref() {
        println!("We got back the value: {val_back}!");
    }
}

Null-unchecked version

If you are sure the pointer can never be null and are looking for some kind of as_ref_unchecked that returns the &T instead of Option<&T>, know that you can dereference the pointer directly.

let ptr: *mut u8 = &mut 10u8 as *mut u8;

unsafe {
    let val_back = &*ptr;
    println!("We got back the value: {val_back}!");
}

pub unsafe fn as_uninit_ref<'a>(self) -> Option<&'a MaybeUninit<T>>

🔬This is a nightly-only experimental API. (ptr_as_uninit #75402)

Returns None if the pointer is null, or else returns a shared reference to the value wrapped in Some. In contrast to as_ref, this does not require that the value has to be initialized.

For the mutable counterpart see as_uninit_mut.

Safety

When calling this method, you have to ensure that either the pointer is null or all of the following is true:

• The pointer must be properly aligned.

• It must be “dereferenceable” in the sense defined in the module documentation.

• You must enforce Rust’s aliasing rules, since the returned lifetime 'a is arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. In particular, while this reference exists, the memory the pointer points to must not get mutated (except inside UnsafeCell).

This applies even if the result of this method is unused!

Examples

Basic usage:

#![feature(ptr_as_uninit)]

let ptr: *mut u8 = &mut 10u8 as *mut u8;

unsafe {
    if let Some(val_back) = ptr.as_uninit_ref() {
        println!("We got back the value: {}!", val_back.assume_init());
    }
}

pub const unsafe fn offset(self, count: isize) -> *mut T

Calculates the offset from a pointer.

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

If any of the following conditions are violated, the result is Undefined Behavior:

• Both the starting and resulting pointer must be either in bounds or one byte past the end of the same allocated object.

• The computed offset, in bytes, cannot overflow an isize.

• The offset being in bounds cannot rely on “wrapping around” the address space. That is, the infinite-precision sum, in bytes must fit in a usize.

The compiler and standard library generally tries to ensure allocations never reach a size where an offset is a concern. For instance, Vec and Box ensure they never allocate more than isize::MAX bytes, so vec.as_ptr().add(vec.len()) is always safe.

Most platforms fundamentally can’t even construct such an allocation. For instance, no known 64-bit platform can ever serve a request for 2⁶³ bytes due to page-table limitations or splitting the address space. However, some 32-bit and 16-bit platforms may successfully serve a request for more than isize::MAX bytes with things like Physical Address Extension. As such, memory acquired directly from allocators or memory mapped files may be too large to handle with this function.

Consider using wrapping_offset instead if these constraints are difficult to satisfy. The only advantage of this method is that it enables more aggressive compiler optimizations.

Examples

Basic usage:

let mut s = [1, 2, 3];
let ptr: *mut u32 = s.as_mut_ptr();

unsafe {
    println!("{}", *ptr.offset(1));
    println!("{}", *ptr.offset(2));
}

pub unsafe fn byte_offset(self, count: isize) -> *mut T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes.

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using offset on it. See that method for documentation and safety requirements.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub const fn wrapping_offset(self, count: isize) -> *mut T

Calculates the offset from a pointer using wrapping arithmetic. count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

This operation itself is always safe, but using the resulting pointer is not.

The resulting pointer “remembers” the allocated object that self points to; it must not be used to read or write other allocated objects.

In other words, let z = x.wrapping_offset((y as isize) - (x as isize)) does not make z the same as y even if we assume T has size 1 and there is no overflow: z is still attached to the object x is attached to, and dereferencing it is Undefined Behavior unless x and y point into the same allocated object.

Compared to offset, this method basically delays the requirement of staying within the same allocated object: offset is immediate Undefined Behavior when crossing object boundaries; wrapping_offset produces a pointer but still leads to Undefined Behavior if a pointer is dereferenced when it is out-of-bounds of the object it is attached to. offset can be optimized better and is thus preferable in performance-sensitive code.

The delayed check only considers the value of the pointer that was dereferenced, not the intermediate values used during the computation of the final result. For example, x.wrapping_offset(o).wrapping_offset(o.wrapping_neg()) is always the same as x. In other words, leaving the allocated object and then re-entering it later is permitted.

Examples

Basic usage:

// Iterate using a raw pointer in increments of two elements
let mut data = [1u8, 2, 3, 4, 5];
let mut ptr: *mut u8 = data.as_mut_ptr();
let step = 2;
let end_rounded_up = ptr.wrapping_offset(6);

while ptr != end_rounded_up {
    unsafe {
        *ptr = 0;
    }
    ptr = ptr.wrapping_offset(step);
}
assert_eq!(&data, &[0, 2, 0, 4, 0]);

pub fn wrapping_byte_offset(self, count: isize) -> *mut T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes using wrapping arithmetic.

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using wrapping_offset on it. See that method for documentation.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub fn mask(self, mask: usize) -> *mut T

🔬This is a nightly-only experimental API. (ptr_mask #98290)

Masks out bits of the pointer according to a mask.

This is convenience for ptr.map_addr(|a| a & mask).

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub unsafe fn as_mut<'a>(self) -> Option<&'a mut T>

Returns None if the pointer is null, or else returns a unique reference to the value wrapped in Some. If the value may be uninitialized, as_uninit_mut must be used instead.

For the shared counterpart see as_ref.

Safety

When calling this method, you have to ensure that either the pointer is null or all of the following is true:

• The pointer must be properly aligned.

• It must be “dereferenceable” in the sense defined in the module documentation.

• The pointer must point to an initialized instance of T.

• You must enforce Rust’s aliasing rules, since the returned lifetime 'a is arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. In particular, while this reference exists, the memory the pointer points to must not get accessed (read or written) through any other pointer.

This applies even if the result of this method is unused! (The part about being initialized is not yet fully decided, but until it is, the only safe approach is to ensure that they are indeed initialized.)

Examples

Basic usage:

let mut s = [1, 2, 3];
let ptr: *mut u32 = s.as_mut_ptr();
let first_value = unsafe { ptr.as_mut().unwrap() };
*first_value = 4;
println!("{s:?}"); // It'll print: "[4, 2, 3]".

Null-unchecked version

If you are sure the pointer can never be null and are looking for some kind of as_mut_unchecked that returns the &mut T instead of Option<&mut T>, know that you can dereference the pointer directly.

let mut s = [1, 2, 3];
let ptr: *mut u32 = s.as_mut_ptr();
let first_value = unsafe { &mut *ptr };
*first_value = 4;
println!("{s:?}"); // It'll print: "[4, 2, 3]".

pub unsafe fn as_uninit_mut<'a>(self) -> Option<&'a mut MaybeUninit<T>>

🔬This is a nightly-only experimental API. (ptr_as_uninit #75402)

Returns None if the pointer is null, or else returns a unique reference to the value wrapped in Some. In contrast to as_mut, this does not require that the value has to be initialized.

For the shared counterpart see as_uninit_ref.

Safety

When calling this method, you have to ensure that either the pointer is null or all of the following is true:

• The pointer must be properly aligned.

• It must be “dereferenceable” in the sense defined in the module documentation.

• You must enforce Rust’s aliasing rules, since the returned lifetime 'a is arbitrarily chosen and does not necessarily reflect the actual lifetime of the data. In particular, while this reference exists, the memory the pointer points to must not get accessed (read or written) through any other pointer.

This applies even if the result of this method is unused!

pub fn guaranteed_eq(self, other: *mut T) -> bool

🔬This is a nightly-only experimental API. (const_raw_ptr_comparison #53020)

Returns whether two pointers are guaranteed to be equal.

At runtime this function behaves like self == other. However, in some contexts (e.g., compile-time evaluation), it is not always possible to determine equality of two pointers, so this function may spuriously return false for pointers that later actually turn out to be equal. But when it returns true, the pointers are guaranteed to be equal.

This function is the mirror of guaranteed_ne, but not its inverse. There are pointer comparisons for which both functions return false.

The return value may change depending on the compiler version and unsafe code might not rely on the result of this function for soundness. It is suggested to only use this function for performance optimizations where spurious false return values by this function do not affect the outcome, but just the performance. The consequences of using this method to make runtime and compile-time code behave differently have not been explored. This method should not be used to introduce such differences, and it should also not be stabilized before we have a better understanding of this issue.

pub unsafe fn guaranteed_ne(self, other: *mut T) -> bool

🔬This is a nightly-only experimental API. (const_raw_ptr_comparison #53020)

Returns whether two pointers are guaranteed to be unequal.

At runtime this function behaves like self != other. However, in some contexts (e.g., compile-time evaluation), it is not always possible to determine the inequality of two pointers, so this function may spuriously return false for pointers that later actually turn out to be unequal. But when it returns true, the pointers are guaranteed to be unequal.

This function is the mirror of guaranteed_eq, but not its inverse. There are pointer comparisons for which both functions return false.

The return value may change depending on the compiler version and unsafe code might not rely on the result of this function for soundness. It is suggested to only use this function for performance optimizations where spurious false return values by this function do not affect the outcome, but just the performance. The consequences of using this method to make runtime and compile-time code behave differently have not been explored. This method should not be used to introduce such differences, and it should also not be stabilized before we have a better understanding of this issue.

pub const unsafe fn offset_from(self, origin: *const T) -> isize

Calculates the distance between two pointers. The returned value is in units of T: the distance in bytes divided by mem::size_of::<T>().

This function is the inverse of offset.

Safety

If any of the following conditions are violated, the result is Undefined Behavior:

• Both the starting and other pointer must be either in bounds or one byte past the end of the same allocated object.

• Both pointers must be derived from a pointer to the same object. (See below for an example.)

• The distance between the pointers, in bytes, must be an exact multiple of the size of T.

• The distance between the pointers, in bytes, cannot overflow an isize.

• The distance being in bounds cannot rely on “wrapping around” the address space.

Rust types are never larger than isize::MAX and Rust allocations never wrap around the address space, so two pointers within some value of any Rust type T will always satisfy the last two conditions. The standard library also generally ensures that allocations never reach a size where an offset is a concern. For instance, Vec and Box ensure they never allocate more than isize::MAX bytes, so ptr_into_vec.offset_from(vec.as_ptr()) always satisfies the last two conditions.

Most platforms fundamentally can’t even construct such a large allocation. For instance, no known 64-bit platform can ever serve a request for 2⁶³ bytes due to page-table limitations or splitting the address space. However, some 32-bit and 16-bit platforms may successfully serve a request for more than isize::MAX bytes with things like Physical Address Extension. As such, memory acquired directly from allocators or memory mapped files may be too large to handle with this function. (Note that offset and add also have a similar limitation and hence cannot be used on such large allocations either.)

Panics

This function panics if T is a Zero-Sized Type (“ZST”).

Examples

Basic usage:

let mut a = [0; 5];
let ptr1: *mut i32 = &mut a[1];
let ptr2: *mut i32 = &mut a[3];
unsafe {
    assert_eq!(ptr2.offset_from(ptr1), 2);
    assert_eq!(ptr1.offset_from(ptr2), -2);
    assert_eq!(ptr1.offset(2), ptr2);
    assert_eq!(ptr2.offset(-2), ptr1);
}

Incorrect usage:

let ptr1 = Box::into_raw(Box::new(0u8));
let ptr2 = Box::into_raw(Box::new(1u8));
let diff = (ptr2 as isize).wrapping_sub(ptr1 as isize);
// Make ptr2_other an "alias" of ptr2, but derived from ptr1.
let ptr2_other = (ptr1 as *mut u8).wrapping_offset(diff);
assert_eq!(ptr2 as usize, ptr2_other as usize);
// Since ptr2_other and ptr2 are derived from pointers to different objects,
// computing their offset is undefined behavior, even though
// they point to the same address!
unsafe {
    let zero = ptr2_other.offset_from(ptr2); // Undefined Behavior
}

pub unsafe fn byte_offset_from(self, origin: *const T) -> isize

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the distance between two pointers. The returned value is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using offset_from on it. See that method for documentation and safety requirements.

For non-Sized pointees this operation considers only the data pointers, ignoring the metadata.

pub unsafe fn sub_ptr(self, origin: *const T) -> usize

🔬This is a nightly-only experimental API. (ptr_sub_ptr #95892)

Calculates the distance between two pointers, where it’s known that self is equal to or greater than origin. The returned value is in units of T: the distance in bytes is divided by mem::size_of::<T>().

This computes the same value that offset_from would compute, but with the added precondition that that the offset is guaranteed to be non-negative. This method is equivalent to usize::from(self.offset_from(origin)).unwrap_unchecked(), but it provides slightly more information to the optimizer, which can sometimes allow it to optimize slightly better with some backends.

This method can be though of as recovering the count that was passed to add (or, with the parameters in the other order, to sub). The following are all equivalent, assuming that their safety preconditions are met:

ptr.sub_ptr(origin) == count
origin.add(count) == ptr
ptr.sub(count) == origin

Safety

• The distance between the pointers must be non-negative (self >= origin)

• All the safety conditions of offset_from apply to this method as well; see it for the full details.

Importantly, despite the return type of this method being able to represent a larger offset, it’s still not permitted to pass pointers which differ by more than isize::MAX bytes. As such, the result of this method will always be less than or equal to isize::MAX as usize.

Panics

This function panics if T is a Zero-Sized Type (“ZST”).

Examples

#![feature(ptr_sub_ptr)]

let mut a = [0; 5];
let p: *mut i32 = a.as_mut_ptr();
unsafe {
    let ptr1: *mut i32 = p.add(1);
    let ptr2: *mut i32 = p.add(3);

    assert_eq!(ptr2.sub_ptr(ptr1), 2);
    assert_eq!(ptr1.add(2), ptr2);
    assert_eq!(ptr2.sub(2), ptr1);
    assert_eq!(ptr2.sub_ptr(ptr2), 0);
}

// This would be incorrect, as the pointers are not correctly ordered:
// ptr1.offset_from(ptr2)

pub const unsafe fn add(self, count: usize) -> *mut T

Calculates the offset from a pointer (convenience for .offset(count as isize)).

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

If any of the following conditions are violated, the result is Undefined Behavior:

• Both the starting and resulting pointer must be either in bounds or one byte past the end of the same allocated object.

• The computed offset, in bytes, cannot overflow an isize.

• The offset being in bounds cannot rely on “wrapping around” the address space. That is, the infinite-precision sum must fit in a usize.

The compiler and standard library generally tries to ensure allocations never reach a size where an offset is a concern. For instance, Vec and Box ensure they never allocate more than isize::MAX bytes, so vec.as_ptr().add(vec.len()) is always safe.

Most platforms fundamentally can’t even construct such an allocation. For instance, no known 64-bit platform can ever serve a request for 2⁶³ bytes due to page-table limitations or splitting the address space. However, some 32-bit and 16-bit platforms may successfully serve a request for more than isize::MAX bytes with things like Physical Address Extension. As such, memory acquired directly from allocators or memory mapped files may be too large to handle with this function.

Consider using wrapping_add instead if these constraints are difficult to satisfy. The only advantage of this method is that it enables more aggressive compiler optimizations.

Examples

Basic usage:

let s: &str = "123";
let ptr: *const u8 = s.as_ptr();

unsafe {
    println!("{}", *ptr.add(1) as char);
    println!("{}", *ptr.add(2) as char);
}

pub unsafe fn byte_add(self, count: usize) -> *mut T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes (convenience for .byte_offset(count as isize)).

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using add on it. See that method for documentation and safety requirements.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub const unsafe fn sub(self, count: usize) -> *mut T

Calculates the offset from a pointer (convenience for .offset((count as isize).wrapping_neg())).

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

If any of the following conditions are violated, the result is Undefined Behavior:

• Both the starting and resulting pointer must be either in bounds or one byte past the end of the same allocated object.

• The computed offset cannot exceed isize::MAX bytes.

• The offset being in bounds cannot rely on “wrapping around” the address space. That is, the infinite-precision sum must fit in a usize.

The compiler and standard library generally tries to ensure allocations never reach a size where an offset is a concern. For instance, Vec and Box ensure they never allocate more than isize::MAX bytes, so vec.as_ptr().add(vec.len()).sub(vec.len()) is always safe.

Most platforms fundamentally can’t even construct such an allocation. For instance, no known 64-bit platform can ever serve a request for 2⁶³ bytes due to page-table limitations or splitting the address space. However, some 32-bit and 16-bit platforms may successfully serve a request for more than isize::MAX bytes with things like Physical Address Extension. As such, memory acquired directly from allocators or memory mapped files may be too large to handle with this function.

Consider using wrapping_sub instead if these constraints are difficult to satisfy. The only advantage of this method is that it enables more aggressive compiler optimizations.

Examples

Basic usage:

let s: &str = "123";

unsafe {
    let end: *const u8 = s.as_ptr().add(3);
    println!("{}", *end.sub(1) as char);
    println!("{}", *end.sub(2) as char);
}

pub unsafe fn byte_sub(self, count: usize) -> *mut T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes (convenience for .byte_offset((count as isize).wrapping_neg())).

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using sub on it. See that method for documentation and safety requirements.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub const fn wrapping_add(self, count: usize) -> *mut T

Calculates the offset from a pointer using wrapping arithmetic. (convenience for .wrapping_offset(count as isize))

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

This operation itself is always safe, but using the resulting pointer is not.

The resulting pointer “remembers” the allocated object that self points to; it must not be used to read or write other allocated objects.

In other words, let z = x.wrapping_add((y as usize) - (x as usize)) does not make z the same as y even if we assume T has size 1 and there is no overflow: z is still attached to the object x is attached to, and dereferencing it is Undefined Behavior unless x and y point into the same allocated object.

Compared to add, this method basically delays the requirement of staying within the same allocated object: add is immediate Undefined Behavior when crossing object boundaries; wrapping_add produces a pointer but still leads to Undefined Behavior if a pointer is dereferenced when it is out-of-bounds of the object it is attached to. add can be optimized better and is thus preferable in performance-sensitive code.

The delayed check only considers the value of the pointer that was dereferenced, not the intermediate values used during the computation of the final result. For example, x.wrapping_add(o).wrapping_sub(o) is always the same as x. In other words, leaving the allocated object and then re-entering it later is permitted.

Examples

Basic usage:

// Iterate using a raw pointer in increments of two elements
let data = [1u8, 2, 3, 4, 5];
let mut ptr: *const u8 = data.as_ptr();
let step = 2;
let end_rounded_up = ptr.wrapping_add(6);

// This loop prints "1, 3, 5, "
while ptr != end_rounded_up {
    unsafe {
        print!("{}, ", *ptr);
    }
    ptr = ptr.wrapping_add(step);
}

pub fn wrapping_byte_add(self, count: usize) -> *mut T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes using wrapping arithmetic. (convenience for .wrapping_byte_offset(count as isize))

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using wrapping_add on it. See that method for documentation.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub const fn wrapping_sub(self, count: usize) -> *mut T

Calculates the offset from a pointer using wrapping arithmetic. (convenience for .wrapping_offset((count as isize).wrapping_neg()))

count is in units of T; e.g., a count of 3 represents a pointer offset of 3 * size_of::<T>() bytes.

Safety

This operation itself is always safe, but using the resulting pointer is not.

The resulting pointer “remembers” the allocated object that self points to; it must not be used to read or write other allocated objects.

In other words, let z = x.wrapping_sub((x as usize) - (y as usize)) does not make z the same as y even if we assume T has size 1 and there is no overflow: z is still attached to the object x is attached to, and dereferencing it is Undefined Behavior unless x and y point into the same allocated object.

Compared to sub, this method basically delays the requirement of staying within the same allocated object: sub is immediate Undefined Behavior when crossing object boundaries; wrapping_sub produces a pointer but still leads to Undefined Behavior if a pointer is dereferenced when it is out-of-bounds of the object it is attached to. sub can be optimized better and is thus preferable in performance-sensitive code.

The delayed check only considers the value of the pointer that was dereferenced, not the intermediate values used during the computation of the final result. For example, x.wrapping_add(o).wrapping_sub(o) is always the same as x. In other words, leaving the allocated object and then re-entering it later is permitted.

Examples

Basic usage:

// Iterate using a raw pointer in increments of two elements (backwards)
let data = [1u8, 2, 3, 4, 5];
let mut ptr: *const u8 = data.as_ptr();
let start_rounded_down = ptr.wrapping_sub(2);
ptr = ptr.wrapping_add(4);
let step = 2;
// This loop prints "5, 3, 1, "
while ptr != start_rounded_down {
    unsafe {
        print!("{}, ", *ptr);
    }
    ptr = ptr.wrapping_sub(step);
}

pub fn wrapping_byte_sub(self, count: usize) -> *mut T

🔬This is a nightly-only experimental API. (pointer_byte_offsets #96283)

Calculates the offset from a pointer in bytes using wrapping arithmetic. (convenience for .wrapping_offset((count as isize).wrapping_neg()))

count is in units of bytes.

This is purely a convenience for casting to a u8 pointer and using wrapping_sub on it. See that method for documentation.

For non-Sized pointees this operation changes only the data pointer, leaving the metadata untouched.

pub unsafe fn read(self) -> T

Reads the value from self without moving it. This leaves the memory in self unchanged.

See ptr::read for safety concerns and examples.

pub unsafe fn read_volatile(self) -> T

Performs a volatile read of the value from self without moving it. This leaves the memory in self unchanged.

Volatile operations are intended to act on I/O memory, and are guaranteed to not be elided or reordered by the compiler across other volatile operations.

See ptr::read_volatile for safety concerns and examples.

pub unsafe fn read_unaligned(self) -> T

Reads the value from self without moving it. This leaves the memory in self unchanged.

Unlike read, the pointer may be unaligned.

See ptr::read_unaligned for safety concerns and examples.

pub const unsafe fn copy_to(self, dest: *mut T, count: usize)

Copies count * size_of<T> bytes from self to dest. The source and destination may overlap.

NOTE: this has the same argument order as ptr::copy.

See ptr::copy for safety concerns and examples.

pub const unsafe fn copy_to_nonoverlapping(self, dest: *mut T, count: usize)

Copies count * size_of<T> bytes from self to dest. The source and destination may not overlap.

NOTE: this has the same argument order as ptr::copy_nonoverlapping.

See ptr::copy_nonoverlapping for safety concerns and examples.

pub const unsafe fn copy_from(self, src: *const T, count: usize)

Copies count * size_of<T> bytes from src to self. The source and destination may overlap.

NOTE: this has the opposite argument order of ptr::copy.

See ptr::copy for safety concerns and examples.

pub const unsafe fn copy_from_nonoverlapping(self, src: *const T, count: usize)

Copies count * size_of<T> bytes from src to self. The source and destination may not overlap.

NOTE: this has the opposite argument order of ptr::copy_nonoverlapping.

See ptr::copy_nonoverlapping for safety concerns and examples.

pub unsafe fn drop_in_place(self)

Executes the destructor (if any) of the pointed-to value.

See ptr::drop_in_place for safety concerns and examples.

pub unsafe fn write(self, val: T)

Overwrites a memory location with the given value without reading or dropping the old value.

See ptr::write for safety concerns and examples.

pub unsafe fn write_bytes(self, val: u8, count: usize)

Invokes memset on the specified pointer, setting count * size_of::<T>() bytes of memory starting at self to val.

See ptr::write_bytes for safety concerns and examples.

pub unsafe fn write_volatile(self, val: T)

Performs a volatile write of a memory location with the given value without reading or dropping the old value.

Volatile operations are intended to act on I/O memory, and are guaranteed to not be elided or reordered by the compiler across other volatile operations.

See ptr::write_volatile for safety concerns and examples.

pub unsafe fn write_unaligned(self, val: T)

Overwrites a memory location with the given value without reading or dropping the old value.

Unlike write, the pointer may be unaligned.

See ptr::write_unaligned for safety concerns and examples.

pub unsafe fn replace(self, src: T) -> T

Replaces the value at self with src, returning the old value, without dropping either.

See ptr::replace for safety concerns and examples.

pub unsafe fn swap(self, with: *mut T)

Swaps the values at two mutable locations of the same type, without deinitializing either. They may overlap, unlike mem::swap which is otherwise equivalent.

See ptr::swap for safety concerns and examples.

pub fn align_offset(self, align: usize) -> usize

Computes the offset that needs to be applied to the pointer in order to make it aligned to align.

If it is not possible to align the pointer, the implementation returns usize::MAX. It is permissible for the implementation to always return usize::MAX. Only your algorithm’s performance can depend on getting a usable offset here, not its correctness.

The offset is expressed in number of T elements, and not bytes. The value returned can be used with the wrapping_add method.

There are no guarantees whatsoever that offsetting the pointer will not overflow or go beyond the allocation that the pointer points into. It is up to the caller to ensure that the returned offset is correct in all terms other than alignment.

Panics

The function panics if align is not a power-of-two.

Examples

Accessing adjacent u8 as u16

use std::mem::align_of;

let mut x = [5_u8, 6, 7, 8, 9];
let ptr = x.as_mut_ptr();
let offset = ptr.align_offset(align_of::<u16>());

if offset < x.len() - 1 {
    let u16_ptr = ptr.add(offset).cast::<u16>();
    *u16_ptr = 0;

    assert!(x == [0, 0, 7, 8, 9] || x == [5, 0, 0, 8, 9]);
} else {
    // while the pointer can be aligned via `offset`, it would point
    // outside the allocation
}

pub fn is_aligned(self) -> bool

🔬This is a nightly-only experimental API. (pointer_is_aligned #96284)

Returns whether the pointer is properly aligned for T.

pub fn is_aligned_to(self, align: usize) -> bool

🔬This is a nightly-only experimental API. (pointer_is_aligned #96284)

Returns whether the pointer is aligned to align.

For non-Sized pointees this operation considers only the data pointer, ignoring the metadata.

Panics

The function panics if align is not a power-of-two (this includes 0).

Trait Implementations

impl<T> Clone for *const Twhere
    T: ?Sized,

fn clone(&self) -> *const T

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Clone for *mut Twhere
    T: ?Sized,

fn clone(&self) -> *mut T

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<T> Debug for *const Twhere
    T: ?Sized,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Debug for *mut Twhere
    T: ?Sized,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> From<*mut T> for AtomicPtr<T>

fn from(p: *mut T) -> AtomicPtr<T>

Converts a *mut T into an AtomicPtr<T>.

impl<T> Hash for *const Twhere
    T: ?Sized,

fn hash<H>(&self, state: &mut H)where
    H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where
    H: Hasher,

Feeds a slice of this type into the given Hasher.

impl<T> Hash for *mut Twhere
    T: ?Sized,

fn hash<H>(&self, state: &mut H)where
    H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)where
    H: Hasher,

Feeds a slice of this type into the given Hasher.

impl<T> Ord for *const Twhere
    T: ?Sized,

fn cmp(&self, other: &*const T) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere
    Self: PartialOrd<Self>,

Restrict a value to a certain interval.

impl<T> Ord for *mut Twhere
    T: ?Sized,

fn cmp(&self, other: &*mut T) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Selfwhere
    Self: PartialOrd<Self>,

Restrict a value to a certain interval.

impl<T> PartialEq<*const T> for *const Twhere
    T: ?Sized,

fn eq(&self, other: &*const T) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> PartialEq<*mut T> for *mut Twhere
    T: ?Sized,

fn eq(&self, other: &*mut T) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<T> PartialOrd<*const T> for *const Twhere
    T: ?Sized,

fn partial_cmp(&self, other: &*const T) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &*const T) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &*const T) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &*const T) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &*const T) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T> PartialOrd<*mut T> for *mut Twhere
    T: ?Sized,

fn partial_cmp(&self, other: &*mut T) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &*mut T) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &*mut T) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &*mut T) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &*mut T) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl<T> Pointer for *const Twhere
    T: ?Sized,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Pointer for *mut Twhere
    T: ?Sized,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<'a, T, U> CoerceUnsized<*const U> for &'a Twhere
    T: Unsize<U> + ?Sized,
    U: ?Sized,

impl<'a, T, U> CoerceUnsized<*const U> for &'a mut Twhere
    T: Unsize<U> + ?Sized,
    U: ?Sized,

impl<T, U> CoerceUnsized<*const U> for *const Twhere
    T: Unsize<U> + ?Sized,
    U: ?Sized,

impl<T, U> CoerceUnsized<*const U> for *mut Twhere
    T: Unsize<U> + ?Sized,
    U: ?Sized,

impl<'a, T, U> CoerceUnsized<*mut U> for &'a mut Twhere
    T: Unsize<U> + ?Sized,
    U: ?Sized,

impl<T, U> CoerceUnsized<*mut U> for *mut Twhere
    T: Unsize<U> + ?Sized,
    U: ?Sized,

impl<T> Copy for *const Twhere
    T: ?Sized,

impl<T> Copy for *mut Twhere
    T: ?Sized,

impl<T, U> DispatchFromDyn<*const U> for *const Twhere
    T: Unsize<U> + ?Sized,
    U: ?Sized,

impl<T, U> DispatchFromDyn<*mut U> for *mut Twhere
    T: Unsize<U> + ?Sized,
    U: ?Sized,

impl<T> Eq for *const Twhere
    T: ?Sized,

impl<T> Eq for *mut Twhere
    T: ?Sized,

impl<T> !Send for *const Twhere
    T: ?Sized,

impl<T> !Send for *mut Twhere
    T: ?Sized,

impl<T> !Sync for *const Twhere
    T: ?Sized,

impl<T> !Sync for *mut Twhere
    T: ?Sized,

impl<T> Unpin for *const Twhere
    T: ?Sized,

impl<T> Unpin for *mut Twhere
    T: ?Sized,

impl<T> UnwindSafe for *const Twhere
    T: RefUnwindSafe + ?Sized,

impl<T> UnwindSafe for *mut Twhere
    T: RefUnwindSafe + ?Sized,